A To Z Appliance Repair

Commercial fryer safety checks include: verifying hi-limit switch operation, checking thermostat accuracy, inspecting gas connections and pressure (gas fryers), testing electrical connections (electric fryers), checking oil filtration system function, inspecting drain valve operation, verifying fire suppression system compatibility, and checking for oil leaks. Safety checks should be performed by a certified technician at every service visit.

Commercial refrigerators must maintain 40°F (4°C) or below for food safety compliance. Walk-in freezers should be at 0°F (-18°C) or below. Many food safety programs require refrigerators to run at 35-38°F for proper margin. If your unit struggles to maintain proper temperature, especially during busy service periods or in hot kitchen environments, call a technician — compressor capacity or refrigerant levels may be the issue.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.