AL Plumbing LLC

NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations) requires cleaning frequency based on cooking volume: monthly for solid fuel cooking (wood, charcoal); quarterly for high-volume cooking (24-hour operations, charbroiling); semi-annually for moderate-volume cooking; and annually for low-volume cooking (pizzerias, churches, seasonal businesses). Your local fire marshal may have additional requirements. Failure to comply can void your fire suppression system coverage.

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

Reduced ice production is usually caused by: mineral scale buildup on evaporator plates reducing heat transfer, dirty condenser coils reducing refrigeration efficiency, warm ambient temperature in the equipment room, low refrigerant levels, or water flow problems. The fix for scale buildup is professional cleaning and descaling. Other issues require a technician. Never ignore reduced production — it often progresses to complete failure.