All Day Plumbing

Chemical dispensing problems are typically caused by: clogged or faulty chemical pumps, incorrect dilution ratios, empty chemical containers, broken injection lines, or control board issues. In low-temperature machines, proper chemical concentration is essential for sanitization — test strips should verify concentration after every repair. Many chemical distributors offer free testing; alternatively, a technician can verify and repair the dispensing system.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

Emergency repair typically costs 1.5-2.5x normal rates. After-hours service calls usually run $150-$300 for the diagnostic fee, plus parts and labor. Weekend and holiday rates can be higher. However, the cost of downtime — lost revenue, food waste, and staff idle time — almost always exceeds the emergency service premium. Most providers charge $100-$200 diagnostic fees that apply to the total repair.