Anchorage Plumbing & Heating

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

Commercial fryer safety checks include: verifying hi-limit switch operation, checking thermostat accuracy, inspecting gas connections and pressure (gas fryers), testing electrical connections (electric fryers), checking oil filtration system function, inspecting drain valve operation, verifying fire suppression system compatibility, and checking for oil leaks. Safety checks should be performed by a certified technician at every service visit.