Around the Town Heating and Cooling

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

Installation costs vary widely: single appliance installation $300-$2,000 depending on complexity (simple drop-in vs. gas/electrical connections required); complete kitchen buildout $15,000-$75,000+. Costs include equipment setting, utility connections (gas, electric, water, drain), ventilation hookup, and commissioning. Always get installation quotes separate from equipment costs — some dealers include installation, others charge separately.

Chemical dispensing problems are typically caused by: clogged or faulty chemical pumps, incorrect dilution ratios, empty chemical containers, broken injection lines, or control board issues. In low-temperature machines, proper chemical concentration is essential for sanitization — test strips should verify concentration after every repair. Many chemical distributors offer free testing; alternatively, a technician can verify and repair the dispensing system.