CF Contracting Inc.

Commercial refrigerators must maintain 40°F (4°C) or below for food safety compliance. Walk-in freezers should be at 0°F (-18°C) or below. Many food safety programs require refrigerators to run at 35-38°F for proper margin. If your unit struggles to maintain proper temperature, especially during busy service periods or in hot kitchen environments, call a technician — compressor capacity or refrigerant levels may be the issue.

Ice quality issues often indicate water system or refrigeration problems: cloudy ice suggests poor water quality or mineral content; soft ice indicates inadequate freeze cycle time or refrigerant issues; small or misshapen cubes typically point to low water flow, scale buildup on evaporator plates, or refrigerant problems. All of these issues affect the safety and quality of ice used in beverages and food service.

The hi-limit switch is a safety device that cuts power when fryer temperature exceeds safe limits. Common causes: faulty thermostat allowing oil to overheat, failing hi-limit switch itself, improper temperature settings, low oil level exposing heating elements, or carbon buildup insulating heating elements. Never bypass the hi-limit switch — it prevents fires. Call a technician to diagnose the root cause.