City Electric of Montgomery

A comprehensive PM program should include: scheduled inspections at manufacturer-recommended intervals, cleaning of condenser coils and filters, calibration of temperature controls, inspection and testing of safety systems, lubrication of moving parts, replacement of wear items (gaskets, filters, belts), refrigerant level checks, combustion analysis for gas equipment, and detailed documentation for each visit. Avoid programs that are just a visual inspection without hands-on service.

Critical food safety temperatures: Cold holding — 40°F (4°C) or below for refrigeration; freezer 0°F (-18°C) or below. Hot holding — 140°F (60°C) or above for steam tables and food warmers. Cooking temperatures vary by food type (145°F-165°F). Dishwasher final rinse — 180°F (82°C) for high-temp machines. Any equipment consistently failing to maintain these temperatures is both a safety risk and a health code violation.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.