Dallas Appliance Repair

Chemical dispensing problems are typically caused by: clogged or faulty chemical pumps, incorrect dilution ratios, empty chemical containers, broken injection lines, or control board issues. In low-temperature machines, proper chemical concentration is essential for sanitization — test strips should verify concentration after every repair. Many chemical distributors offer free testing; alternatively, a technician can verify and repair the dispensing system.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

Preventive maintenance frequency depends on the equipment and usage volume. As a general guideline: fryers and ovens should be inspected every 3-6 months; refrigeration equipment annually or semi-annually; ice machines every 6 months (including cleaning and sanitizing); exhaust hoods quarterly to semi-annually per NFPA 96; and dishwashers quarterly. High-volume operations benefit from more frequent service intervals.