Darnell Plumbing Co LLC

Reduced ice production is usually caused by: mineral scale buildup on evaporator plates reducing heat transfer, dirty condenser coils reducing refrigeration efficiency, warm ambient temperature in the equipment room, low refrigerant levels, or water flow problems. The fix for scale buildup is professional cleaning and descaling. Other issues require a technician. Never ignore reduced production — it often progresses to complete failure.

Signs of compressor problems: unit not reaching temperature despite running constantly, compressor making loud knocking or grinding sounds, compressor starting and stopping rapidly (short cycling), compressor not starting at all, or high pressure shutdowns. Compressor failure is typically the most expensive refrigeration repair. Early diagnosis can sometimes allow for less costly repairs — don't wait if you hear unusual compressor noises.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.