Electronics Repair Center

A compliant hood cleaning includes: complete degreasing of the hood canopy, all grease filters, the entire ductwork system from hood to exhaust fan discharge, and the exhaust fan and housing. Areas that cannot be thoroughly cleaned must be documented. Cleaning must be performed by a qualified company and documented with service report and before/after photos. The technician should leave a dated sticker on the equipment and provide a compliance certificate.

Common causes include: faulty igniter or ignition module, failed heating element (electric ovens), thermostat or temperature probe failure, gas valve issues, or clogged burner ports. Start by checking error codes on the control panel if equipped. If the oven lights but doesn't reach temperature, the thermostat or temperature probe is often the culprit. A certified technician can diagnose the root cause quickly.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.