Harolds Sewing & Vacuum Center

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

Installation time varies significantly: single appliance with existing connections 2-4 hours; single appliance requiring new utility connections 4-8 hours; full kitchen buildout 1-3 weeks depending on scope, permit timelines, and contractor scheduling. Work with your installer to create a realistic timeline that accounts for utility work, inspections, and health department walkthroughs before opening.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.