Houston Frigidaire Repair

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations) requires cleaning frequency based on cooking volume: monthly for solid fuel cooking (wood, charcoal); quarterly for high-volume cooking (24-hour operations, charbroiling); semi-annually for moderate-volume cooking; and annually for low-volume cooking (pizzerias, churches, seasonal businesses). Your local fire marshal may have additional requirements. Failure to comply can void your fire suppression system coverage.