J T Appliance

Walk-in door gaskets typically last 2-4 years and should be inspected every 6 months. Signs of failing gaskets: visible tears or cracks, frost buildup near the door frame, condensation on the door frame, noticeably warmer temperatures near the door, or the door not staying closed. A failing gasket forces the compressor to work harder, increasing energy costs and reducing equipment life.

High-temperature commercial dishwashers must reach 180°F (82°C) at the final rinse to achieve proper sanitization per NSF and health department standards. Low-temperature chemical sanitizing machines must maintain proper chemical concentrations (chlorine, iodine, or quaternary). If your high-temp machine isn't reaching 180°F, it's not properly sanitizing and may fail health inspection. Call a technician immediately.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.