Lakewood Addition Appliance Repair

The hi-limit switch is a safety device that cuts power when fryer temperature exceeds safe limits. Common causes: faulty thermostat allowing oil to overheat, failing hi-limit switch itself, improper temperature settings, low oil level exposing heating elements, or carbon buildup insulating heating elements. Never bypass the hi-limit switch — it prevents fires. Call a technician to diagnose the root cause.

Reduced ice production is usually caused by: mineral scale buildup on evaporator plates reducing heat transfer, dirty condenser coils reducing refrigeration efficiency, warm ambient temperature in the equipment room, low refrigerant levels, or water flow problems. The fix for scale buildup is professional cleaning and descaling. Other issues require a technician. Never ignore reduced production — it often progresses to complete failure.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.