Mark J. Puharic Plumbing & Heating Inc.

NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations) requires cleaning frequency based on cooking volume: monthly for solid fuel cooking (wood, charcoal); quarterly for high-volume cooking (24-hour operations, charbroiling); semi-annually for moderate-volume cooking; and annually for low-volume cooking (pizzerias, churches, seasonal businesses). Your local fire marshal may have additional requirements. Failure to comply can void your fire suppression system coverage.

Signs of a refrigerant leak: unit runs but doesn't reach temperature, ice buildup on evaporator coil, hissing or bubbling sounds from refrigerant lines, oily residue near connections or fittings, and higher than normal electricity consumption. Only EPA-certified technicians can legally handle refrigerant. If you suspect a leak, call a technician promptly — operating a refrigerator with low refrigerant damages the compressor.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.