Moore Brothers Commercial

A comprehensive PM program should include: scheduled inspections at manufacturer-recommended intervals, cleaning of condenser coils and filters, calibration of temperature controls, inspection and testing of safety systems, lubrication of moving parts, replacement of wear items (gaskets, filters, belts), refrigerant level checks, combustion analysis for gas equipment, and detailed documentation for each visit. Avoid programs that are just a visual inspection without hands-on service.

A compliant hood cleaning includes: complete degreasing of the hood canopy, all grease filters, the entire ductwork system from hood to exhaust fan discharge, and the exhaust fan and housing. Areas that cannot be thoroughly cleaned must be documented. Cleaning must be performed by a qualified company and documented with service report and before/after photos. The technician should leave a dated sticker on the equipment and provide a compliance certificate.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.