Reeves Family Plumbing

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

Commercial refrigerators must maintain 40°F (4°C) or below for food safety compliance. Walk-in freezers should be at 0°F (-18°C) or below. Many food safety programs require refrigerators to run at 35-38°F for proper margin. If your unit struggles to maintain proper temperature, especially during busy service periods or in hot kitchen environments, call a technician — compressor capacity or refrigerant levels may be the issue.

NFPA 96 (Standard for Ventilation Control and Fire Protection of Commercial Cooking Operations) requires cleaning frequency based on cooking volume: monthly for solid fuel cooking (wood, charcoal); quarterly for high-volume cooking (24-hour operations, charbroiling); semi-annually for moderate-volume cooking; and annually for low-volume cooking (pizzerias, churches, seasonal businesses). Your local fire marshal may have additional requirements. Failure to comply can void your fire suppression system coverage.