Viking Factory Certified Appliance Repair

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

A compliant hood cleaning includes: complete degreasing of the hood canopy, all grease filters, the entire ductwork system from hood to exhaust fan discharge, and the exhaust fan and housing. Areas that cannot be thoroughly cleaned must be documented. Cleaning must be performed by a qualified company and documented with service report and before/after photos. The technician should leave a dated sticker on the equipment and provide a compliance certificate.