Crestwood Appliance Repair

The hi-limit switch is a safety device that cuts power when fryer temperature exceeds safe limits. Common causes: faulty thermostat allowing oil to overheat, failing hi-limit switch itself, improper temperature settings, low oil level exposing heating elements, or carbon buildup insulating heating elements. Never bypass the hi-limit switch — it prevents fires. Call a technician to diagnose the root cause.

Installation time varies significantly: single appliance with existing connections 2-4 hours; single appliance requiring new utility connections 4-8 hours; full kitchen buildout 1-3 weeks depending on scope, permit timelines, and contractor scheduling. Work with your installer to create a realistic timeline that accounts for utility work, inspections, and health department walkthroughs before opening.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.