Dun-Rite Plumbing & Sewer

Preventive maintenance frequency depends on the equipment and usage volume. As a general guideline: fryers and ovens should be inspected every 3-6 months; refrigeration equipment annually or semi-annually; ice machines every 6 months (including cleaning and sanitizing); exhaust hoods quarterly to semi-annually per NFPA 96; and dishwashers quarterly. High-volume operations benefit from more frequent service intervals.

The hi-limit switch is a safety device that cuts power when fryer temperature exceeds safe limits. Common causes: faulty thermostat allowing oil to overheat, failing hi-limit switch itself, improper temperature settings, low oil level exposing heating elements, or carbon buildup insulating heating elements. Never bypass the hi-limit switch — it prevents fires. Call a technician to diagnose the root cause.

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.