Electricare

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

A comprehensive PM program should include: scheduled inspections at manufacturer-recommended intervals, cleaning of condenser coils and filters, calibration of temperature controls, inspection and testing of safety systems, lubrication of moving parts, replacement of wear items (gaskets, filters, belts), refrigerant level checks, combustion analysis for gas equipment, and detailed documentation for each visit. Avoid programs that are just a visual inspection without hands-on service.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.