Norco Heating and Air Conditioning

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

High-temperature commercial dishwashers must reach 180°F (82°C) at the final rinse to achieve proper sanitization per NSF and health department standards. Low-temperature chemical sanitizing machines must maintain proper chemical concentrations (chlorine, iodine, or quaternary). If your high-temp machine isn't reaching 180°F, it's not properly sanitizing and may fail health inspection. Call a technician immediately.

Reduced ice production is usually caused by: mineral scale buildup on evaporator plates reducing heat transfer, dirty condenser coils reducing refrigeration efficiency, warm ambient temperature in the equipment room, low refrigerant levels, or water flow problems. The fix for scale buildup is professional cleaning and descaling. Other issues require a technician. Never ignore reduced production — it often progresses to complete failure.