Philadelphia Appliance Repair GE Appliance Repair

Signs of a refrigerant leak: unit runs but doesn't reach temperature, ice buildup on evaporator coil, hissing or bubbling sounds from refrigerant lines, oily residue near connections or fittings, and higher than normal electricity consumption. Only EPA-certified technicians can legally handle refrigerant. If you suspect a leak, call a technician promptly — operating a refrigerator with low refrigerant damages the compressor.

The hi-limit switch is a safety device that cuts power when fryer temperature exceeds safe limits. Common causes: faulty thermostat allowing oil to overheat, failing hi-limit switch itself, improper temperature settings, low oil level exposing heating elements, or carbon buildup insulating heating elements. Never bypass the hi-limit switch — it prevents fires. Call a technician to diagnose the root cause.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.