plumbing repair

Chemical dispensing problems are typically caused by: clogged or faulty chemical pumps, incorrect dilution ratios, empty chemical containers, broken injection lines, or control board issues. In low-temperature machines, proper chemical concentration is essential for sanitization — test strips should verify concentration after every repair. Many chemical distributors offer free testing; alternatively, a technician can verify and repair the dispensing system.

Preventive maintenance frequency depends on the equipment and usage volume. As a general guideline: fryers and ovens should be inspected every 3-6 months; refrigeration equipment annually or semi-annually; ice machines every 6 months (including cleaning and sanitizing); exhaust hoods quarterly to semi-annually per NFPA 96; and dishwashers quarterly. High-volume operations benefit from more frequent service intervals.

Commercial refrigerators must maintain 40°F (4°C) or below for food safety compliance. Walk-in freezers should be at 0°F (-18°C) or below. Many food safety programs require refrigerators to run at 35-38°F for proper margin. If your unit struggles to maintain proper temperature, especially during busy service periods or in hot kitchen environments, call a technician — compressor capacity or refrigerant levels may be the issue.