Reliable Appliance Repair

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

Commercial refrigerators must maintain 40°F (4°C) or below for food safety compliance. Walk-in freezers should be at 0°F (-18°C) or below. Many food safety programs require refrigerators to run at 35-38°F for proper margin. If your unit struggles to maintain proper temperature, especially during busy service periods or in hot kitchen environments, call a technician — compressor capacity or refrigerant levels may be the issue.