Spencer for Hire

Critical food safety temperatures: Cold holding — 40°F (4°C) or below for refrigeration; freezer 0°F (-18°C) or below. Hot holding — 140°F (60°C) or above for steam tables and food warmers. Cooking temperatures vary by food type (145°F-165°F). Dishwasher final rinse — 180°F (82°C) for high-temp machines. Any equipment consistently failing to maintain these temperatures is both a safety risk and a health code violation.

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.

Reduced ice production is usually caused by: mineral scale buildup on evaporator plates reducing heat transfer, dirty condenser coils reducing refrigeration efficiency, warm ambient temperature in the equipment room, low refrigerant levels, or water flow problems. The fix for scale buildup is professional cleaning and descaling. Other issues require a technician. Never ignore reduced production — it often progresses to complete failure.