TVZ4LESS

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.

Critical food safety temperatures: Cold holding — 40°F (4°C) or below for refrigeration; freezer 0°F (-18°C) or below. Hot holding — 140°F (60°C) or above for steam tables and food warmers. Cooking temperatures vary by food type (145°F-165°F). Dishwasher final rinse — 180°F (82°C) for high-temp machines. Any equipment consistently failing to maintain these temperatures is both a safety risk and a health code violation.

Most commercial kitchen equipment installations require permits: gas appliance permits for any gas connection work, electrical permits for new circuits or panel changes, plumbing permits for water and drain connections, and health department approval for new food service operations or major renovations. Requirements vary by jurisdiction — your installer should know local requirements. Operating without required permits can result in fines and forced closure during inspections.