Xpress Quality Services LLC

The hi-limit switch is a safety device that cuts power when fryer temperature exceeds safe limits. Common causes: faulty thermostat allowing oil to overheat, failing hi-limit switch itself, improper temperature settings, low oil level exposing heating elements, or carbon buildup insulating heating elements. Never bypass the hi-limit switch — it prevents fires. Call a technician to diagnose the root cause.

Ice quality issues often indicate water system or refrigeration problems: cloudy ice suggests poor water quality or mineral content; soft ice indicates inadequate freeze cycle time or refrigerant issues; small or misshapen cubes typically point to low water flow, scale buildup on evaporator plates, or refrigerant problems. All of these issues affect the safety and quality of ice used in beverages and food service.

1) Check if the condenser unit is running. 2) Inspect condenser coils for dirt and debris — blocked coils are a common cause. 3) Ensure walk-in door gaskets are sealing properly. 4) Check if evaporator fan is running. 5) Look for ice buildup on evaporator coils (defrost system failure). If temperature is rising significantly, move temperature-sensitive inventory and call a technician immediately — this is an emergency situation.